Rotary Mixer
RM Rotary Mixer
Clifton rotary mixer with variable speed and a broad range of optional accessory heads available for mixing micro tubes, tubes or flasks.
The angle of mixing is fully adjustable and suitable for continuous or intermittent mixing. Bench-top or wall mountable, saving space. Can be used inside laboratory incubators up to 60°C or in cold rooms at a minimum of 4°C.
Painted body features anti-bacterial protection, hygienic coating which actively inhibits bacterial growth.
Image shown with accessory RMD016
See the range of accessories compatible with the RM range.
3 Year Warranty
The RM Series comes with a 3 year warranty as standard, we also offer free advice and support for our mixers.
MADE IN GREAT BRITAIN
The RM Series is made here in Great Britain with the highest quality of materials.
Please see below our full range of sizes for the RM range
Specifications
| Product Code | RM-2 |
| Mixing Speed | Variable 5-30 rpm |
| Operating Temperature | 4°C to 60°C Can be used inside Laboratory Incubators or in cold rooms. |
| Voltage | 230V |
| Dimensions | |
| External (mm) | 210w x 250d x 200h |
Images shown with accessory RMD016
Features and Benefits
Angle of the disc is fully adjustable from vertical to horizontal.
Variable 5 - 30rpm.
Illuminated on/off switch.
Base features holes making the unit suitable for wall mounting saving valuable bench space.
Broad range of accessories available to suit wide range of applications.
Safety Features
- Motor fitted with one shot over temperature/overcurrent safety device.
Notes
For applications including growth of mini preps, bacterial culture, viral culture, tissue culture in test tubes & centrifuge tubes.
Accessories guide
End to end mixing - suitable for tube diameters 8 - 30mm in three accessory options: RMD024, RMD012 or RMD006.
Tumbling mixing carousel - suitable for tube diameters 16 or 25mm in two accessory options: RMD016 or RMD025.
Flask mixing, mix and match - using base disc RMD-1, then select appropriate flask clips FC0025, FC0050, FC0100 and or FC0250 to mount on a disc - suitable for conical flasks 25ml - 250ml.
Tube mixing, mix and match - using base disc RMD-1, then select appropriate diameter clip TC0811, TC1517, TC2730 to mount on a disc - suitable for tubes 8mm - 30mm.
ACCESSORIES
Flask Clip
With the RMD-1 mixing disc it is possible to mix and match a variety of clips to suit different applications. Clips are supplied with all necessary fixings to enable them to be attached to accessory disc. Can be autoclaved.
| Product Code | |
|---|---|
|
FC0025 - 25ml |
|
|
FC0050 - 50ml |
|
|
FC0100 - 100ml |
|
|
FC0250 - 250ml |
|
Tube Clips
The range of accessories can also be autoclaved and allow for easy loading and tube removal.
| Product Code | |
|---|---|
|
TC0811 Clip for 8-11mm diameter tubes |
|
|
TC1517 Clips for 15-17mm diameter tubes |
|
|
TC2730 Clips for 27-30mm diameter tubes |
|
Rotary Mixer Disc
Rotary mixer disc accepts flask and tube mix and match clips.
The image below is shown fitted with four FC0025 25ml flask clips – not supplied.
| Product Code | |
|---|---|
|
RMD-1 |
|
Rotary Mixer Disc With Clips
The clips can be autoclaved.
| Product Code | |
|---|---|
|
RMD006 6 Clips for tube diameters between 25 - 30mm |
|
|
RMD012 12 Clips for tubes diameters between 15 - 17mm |
|
|
RMD024 24 Clips for tube diameters between 8 - 11mm |
Carousel For Tubes
The accessory is easy to fit onto the RM-2 locating on three pins then secured in place with thumb wheel.
| Product Code |
|---|
|
RMD016 Carousel for tubes up to 16mm diameter |
|
RMD025 Carousel for tubes up to 25mm diameter |
Downloads
Detailed document containing the specifications for the RM range.