ShallowBaths™
ShallowBaths™
Clifton digital ShallowBaths™ are perfect for heating small height samples such as micro tubes, micro plates and bottles. ShallowBaths™ require less water and less process chemicals, so are therefore economical to use. Controls feature auto alarm setting, illuminated on/off switch, heater and over temperature indications.
Comprising of a high quality corrosion resistant stainless steel tank, with a bright clean finish housed in a durable painted outer case. Painted surfaces feature anti-bacterial finish with a good chemical resistance.
Personal, small footprint water bath, providing a stable temperature environment for life science preparations.
See the range of accessories compatible with the ShallowBath™ range.
3 Year Warranty
The ShallowBath™ Series comes with a 3 year warranty as standard, we also offer free advice and support for our baths.
MADE IN GREAT BRITAIN
The ShallowBath™ Series is made here in Great Britain with the highest quality of materials.
Clifton Shallow Form Series
- Clifton shallow height water baths for life science operate with low liquid level suiting small bottles, micro tubes and micro plates.
- Low profile designs allows easy access to samples and improved visibility.
- Small samples easily seen and not obscured by high sided baths.
- Uses less water and energy.
- When shelf fitted, working depth is 6mm
Traditional Style
- If using a conventional water bath the minimum liquid level for accurate operation is above the height of small bottles tubes etc, often requiring the extra expense of additional raised shelf.
Clifton unstirred water baths are designed for immersion of flasks/bottles/racks in a highly stable temperature environment throughout the water bath. These ShallowBaths™ are ideal for small vessels, tubes and micro plates for incubation/heating.
3 Year Warranty.
Before leaving our factory every water bath is identified with a unique serial number and undergoes a factory calibration adjusting control to known traceable value. Electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.
The shelf in the stainless steel tank provides a stable support for flasks/bottles/racks that can be removed for cleaning. The shelf is a low height design maximising the working height.
Broad range of accessories available to suit wide range of applications.
Painted surfaces feature “anti-bacterial technology” which inhibits bacterial growth, improving hygiene requirements as demanded by clinical and laboratory environments.
Thermal cut out fitted in the heater.
Over temperature alarm automatically set 4˚C above set temperature with visual indicator and heating is turned off protecting samples from over heating.
IP rated clear booted on/off power switch.
Bath fitted with non-slip rubber feet.
Energy Consumption
0.33kWh @ 37°C
(Based on NE2-5D)
The lower the figure, the less energy used. Information supplied for size and range comparison, guidance only and measured consumption at set point. Please remember that the energy consumption may vary due to factors such as location, ventilation, ambient temperatures and loading. ShallowBaths™ with smaller volumes of liquid use less energy.
Controls
Featuring bold LED display of measured temperatures in real-time, increments of ±0.1°C, using precision PID temperature control. Settings retained even after turning the unit off. Easy to use splash proof controls, touch keypads for setting temperature values with indicators for heating and over temperature alarm. Features auto setting over temperature alarm protecting samples at set temperature. Every unit undergoes a factory calibration at two temperatures for validation.
Heating and Sensors
Heaters and temperature sensor are concealed under the tank providing an easy to clean working area. The heating footprint covers the underside of the tank and with a low mass provides rapid energy transfer, resulting in quicker heat up times and a reduction in energy consumption and improved temperature uniformity.
Heating Information
Above 60°C it is recommended that to achieve optimum performance the bath should be covered with a lid or layer of polypropylene spheres - see accessories.
Covering the bath with a lid reduces energy consumption and running costs.
This range of baths will operate at 99°C however are not designed for continuous boiling, the NE1B boiling bath range is recommended.
Clifton clear gable lids help reduce evaporation, assist in keeping samples in a water bath free from contamination and save energy. These gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples. The lid design ensures all condensate returns back into the bath. Insulated handles for safe use.
| Product Code | Bath |
|---|---|
|
GL1-4AF |
NE2-2D |
|
GL1-14F |
NE2-5D |
|
GL1-22AF |
NE2-9D |
When fitted, this lid
prevents contamination of liquid from airborne particles. Can also be useful
when a Clifton water bath is ‘in use’, minimising heat loss, saving energy, and
assisting to maintain bath temperature ready for the next application. The lid
is fitted with an insulated handle.
| Product Code | Bath |
|---|---|
|
LD-4 |
NE2-2D |
|
LD-14 |
NE2-5D |
|
LD-22 |
NE2-9D |
Clifton stainless steel gable lids help reduce evaporation, assist in keeping samples in a water bath free from contamination and save energy. These stainless steel gable lids with a high profile allow extended use of the bath, right into the edges of the tank. No drip points to contaminate samples. The lid design ensures all condensate returns back into the bath. Insulated handles for safe use.
| Product Code | Bath |
|---|---|
|
SL1-4 |
NE2-2D |
|
SL1-14 |
NE2-5D |
|
SL1-22 |
NE2-9D |
Laboratory test tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
- NE2-2D = 1 rack
- NE2-5D = 4 racks
- NE2-9D = 6 racks
| Product Code |
|---|
|
6870 - (26 holes x 17mm diameter) |
|
6871 - (16 holes x 26 mm diameter) |
|
6872 - (36 holes x 13mm diameter) |
|
6873 - (18 holes x 19mm diameter) |
|
6900 - (12 holes x 32mm diameter) |
Please note : When using the racks on a 2 litre chamber, remove 1 shelf from the rack.
| Product Code |
Capacity |
| BA-2 : 2 Litre Pack |
2 Litre baths |
| BA-5 : 4 Litre Pack |
5 Litre baths |
| BA-12 : 12 Litre Pack |
9 Litre baths |
This blanket of hollow spheres is ideal for open tanks of water. Reduces thermal losses – Savings of up to 70% can be achieved with a single layer – Increase energy saving & reducing costs.
| Product Code | Capacity |
| BP0368 : 1 Pack | 2 Litre baths |
| BP0368 : 2 Packs | 5 Litre baths |
| BP0368 : 4 Packs | 9 Litre baths |
Allows easy and quick emptying of water baths, immerse into water bath, squeeze the bellow and point the outlet to a bucket or sink.
| Notes : |
Water temperature must be below 45°C before use. |
| Product Code : |
BX0616 |
|
1. Factory calibration record.
2. The completed calibration record will be enclosed at the rear of the instruction book accompanying the Clifton unit carrying the following information:
Unique record number for traceability.
Serial number of the unit.
Instrument it was checked against.
Calibration temperature and actual sensitivity results.
3. The measurement of uncertainty ±0.8°C. Ambient temperature 21°C ±3°C.
Notes:
A. The calibration record provides a measurement of precision about set point with maximum and minimum sensitivity readings obtained. Precision is defined as “(1) The ability of a measurement to be consistently reproduced” and “(2) The number of significant digits to which a value has been reliably measured”.B. The calibration record does not provide or assures any form of accuracy. Accuracy is defined as “the ability of a measurement to match the actual value of the quantity being measured”.
Product Code : CAL
|
Downloads
The water bath brochure contains all the information on our Clifton water baths, including the shaking baths and the ultrasonic baths.
Detailed document containing the specifications for the ShallowBath™ range of baths.