Bath Armor™
Bath Armor™
Bath Armor™ also known as bath beads, are moisture and gas impermeable, with high thermal conductivity. Smooth and rounded beads that replace water.
Designed for unstirred water baths. Not suitable for NE1D.
Bath image for illustration purposes.
See the range of accessories compatible with the Bath Armor™
Please see below our full range of pack sizes for Bath Armor™
Specifications
Features and Benefits
- Bath can remain always on and ready to use when using bath beads.
- Bottles and tubes stay in place, removing the need for racks.
- Environmentally friendly.
- Made from recyclable material.
- Cleaning frequency reduced.
- No water borne contamination.
- Can be washed or sterilised (not by autoclave).
- Good thermal heat distribution.
Energy Consumption
Run costs represent an average saving of approximately 70% when compared to water.
| Clifton Waterbath | Average Temperature | KW Per Hour | Run Cost |
| NE2-4D | 37°C | £0.04p | £0.13p |
| NE2-8D | 37°C | £0.08p | £0.27p |
| NE2-14D | 37°C | £0.08p | £0.27p |
| NE2-22D | 37°C | £0.08p | £0.27p |
| NE2-28D | 37°C | £0.08p | £0.27p |
| NE2-4D with water | 37°C | £0.16p | £0.54p |
| NE2-22D with water | 37°C | £0.24p | £0.81p |
Tests were done at a run time of 24 hours.
Please note that values may vary depending on factors such as tariffs and product used.
The costs are only to be used as a guide. Costs correct at time of test.
We recommend using the NE2D or NE3DT range for best results.
Packs Required
| Clifton Waterbath Size | BA-2 | BA-5 | BA-12 | Depth per Bath |
| 2 Litre Water Baths | 1 Pack | 40 mm | ||
| 2.5 Litre Water Baths | 1 Pack | 100 mm | ||
| 4 Litre Water Baths | 1 Pack | 100 mm | ||
| 5 Litre Water Baths | 1 Pack | 30 mm | ||
| 8 Litre Water Baths | 1 Pack | 120 mm | ||
| 9 Litre Water Baths | 1 Pack | 40 mm | ||
| 10 Litre Water Baths | 1 Pack | 150 mm | ||
| 14 Litre Water Baths | 1 Pack | 110 mm | ||
| 22 Litre Water Baths | 2 Packs | 120 mm | ||
| 28 Litre Water Baths | 2 Packs | 150 mm |
Please note : All measurements and data provided are only to be used as a guide and all readings were completed using Clifton Range products.
Hints and Tips During Use
- Disinfect frequently.
- We recommend not using lids with Bath Armor™.
- Working temperature range is -80°C to 180°C.
- Cannot be autoclaved.
ACCESSORIES
Chill Bucket with Beads, Bead Bag with 2 off Chill Packs
The chill bucket can maintain cold temperatures 1°C – 8°C for up to 8 hours.
Kit comprises of:
- Chill bucket – with 4 litre capacity.
- Chill packs – durable gel packs, freeze and reuse.
- Bead bags – durable nylon mesh.
Product Code – BUCB-1
Downloads
The water bath brochure contains all the information on our Clifton water baths, including the shaking baths and the ultrasonic baths.
Detailed document containing the specifications for Bath Armor™