NE4-25D DeepChamberBaths™
NE4-25D Stirred Digital DeepChamberBath™
Temperature Range : Ambient +5°C - 99°C
This DeepChamberBath™ is suitable for Gerber and butyrometer testing or where deeper water volumes are required. The bath will accept a maximum of 3 accessory butyrometer racks.
The stainless steel deep tank contained within a sturdy outer case and supplied complete with a stainless steel shelf all providing good water circulation and temperature stability. Includes hinged stainless steel lid.
The Thermostirrer features a digital PID temperature controller and is constructed from stainless steel for durability. Painted surfaces feature a tough anti-bacterial finish with good chemical resistance. Easy to use controls that wipe clean and have an anti-bacterial finish. Immersed components are corrosion resistant. Quiet running in use and providing excellent water temperature stability in the bath. Indication of heating, over temperature alarm and timer running.
Sustainability Attributes
Built to last, ensuring longevity
Products have minimum energy requirements
Products are recyclable
Compostable and biodegradable packaging
Lids reduce energy use by 60%
3 Year Warranty
The NE4-25D Series comes with a 3 year warranty as standard, we also offer free advice and support for our baths.
MADE IN GREAT BRITAIN
The NE4-25D Series is made here in Great Britain with the highest quality of materials.
Specifications
| Product Code | NE4-25D |
| Max Tank Capacity | 25 Litres |
| Temperature Range | Ambient + 5°C - 99°C |
| Temperature Control | PID Digital, LED display showing actual or set temperature, resolution 0.1°C |
| Temperature Alarm | Under/over temperature alarm is automatically set 4˚C above and 4˚C below set point. |
| Sensitivity | ±0.1°C |
| Uniformity | ±0.1°C |
| Timer | Visual indicator and audible end message - variable 00:01 to 99:59 hh:mm |
| Heater Power (220-240V) | 1250W |
| Voltage | 230V / 50-60Hz |
| Drain Tap Fitted | ✅ |
| Lid Fitted | ✅ |
| Packed Weight | 16 kg |
| Dimensions | |
| External (mm) | 440w x 265d x 370h |
| Internal (mm) | 262w x 235d x 300h |
| Water Level (mm) | Minimum water level 280mm - Shelf fitted working depth 240mm |
| Bath Opening (mm) | 250 x 235 |
| Packed (cm) | 63 x 33 x 48 |
Features and Benefits
Ideal for applications where deeper water volume is required such as Gerber milk testing.
Before leaving our factory every water bath is identified with a unique serial number and undergoes a factory calibration adjusting control to known traceable value, electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.
Painted surfaces feature “anti-bacterial technology” which inhibits bacterial growth, improving hygiene requirements as demanded by clinical and laboratory environments.
3 year Warranty
Safety Features
- Features a low liquid level float switch, which ensures heating, is switched off if the liquid falls below the recommended level – display will show “FiLL”. Heating is switched off but stirring continues. To reset carefully top up the liquid to the recommended level.
- The under/over temperature alarm is automatically set 4˚C above and 4˚C below set temperature. When in alarm condition the indicator illuminates and actual bath temperature is shown. If bath is over temperature both heating and stirring are switched off. Once liquid temperature has fallen or risen above/below the alarm setting, the indicator clears and actual bath temperature is shown.
Controls
Featuring a bold LED display of measured temperatures in real-time and in increments of ±0.1°C, using a precision PID temperature controller. Setting for water temperature only or combination of temperature and time. Timer setting variable in 1-minute increments from 00:01 [hh:mm] to 99:59 [hh:mm] with “end” message on completion of the timed period. Time and temperature settings are retained in the memory, even after the unit has been turned off.
ACCESSORIES
12 Hole Stainless Steel Butyrometer Rack
1. Test tube rack designed for holding Butyrometer test tubes for the testing of milk fat using Gerber method.
2. Diameter holes in rack accomodate butyrometer tubes up to 26mm diameter.
3. Rack comprises of three shelves pierced for butyrometer tubes to be inserted with plain base shelf used to support the tubes.
4. Working area of the test tube rack up to 200mm.
5. Rack dimensions, overall height 284mm, width 200mm, length 75mm.
6. Maximum 3 racks per bath.
| Description | |
|---|---|
|
Product Code |
6880 |
UNIVERSAL ACCESSORIES
|
1. Factory calibration record.
2. The completed calibration record will be enclosed at the rear of the instruction book accompanying the Clifton unit carrying the following information: Unique record number for traceability. Serial number of the unit. Instrument it was checked against. Calibration temperature and actual sensitivity results. 3. The measurement of uncertainty ±0.8°C. Ambient temperature 21°C ±3°C.
Notes: A. The calibration record provides a measurement of precision about set point with maximum and minimum sensitivity readings obtained. Precision is defined as “(1) The ability of a measurement to be consistently reproduced” and “(2) The number of significant digits to which a value has been reliably measured”.B. The calibration record does not provide or assures any form of accuracy. Accuracy is defined as “the ability of a measurement to match the actual value of the quantity being measured”. |
Downloads
Detailed document containing the specifications for the NE4-25D range.