Triplebath™
TripleBaths™
Triplebath™ features three independently controlled unstirred water baths in one unit. Analogue and digital options available in either 2 litre or 4 litre combinations. Typically suitable for classroom use performing PCR routines in shallow temperature controlled water, each tank can be set to a different temperature for denaturing, annealing and elongation – reducing solvent and consumables.
Comprising of high quality corrosion resistant stainless steel tanks, with a bright clean finish housed in a durable paint finished outer case. Painted surfaces feature anti-bacterial finish with good chemical resistance. 4 Litre chambers are fitted with side lifting handles for ease of transportation.
Each chamber comes complete with a removable “low” height stainless steel perforated shelf.
Sustainability Attributes
Built to last, ensuring longevity
Products are recyclable
Compostable and biodegradable packaging
Lids reduce energy use by 60%
See the range of accessories compatible with the TripleBath™ range.
3 Year Warranty
The TripleBath™ Series comes with a 3 year warranty as standard, we also offer free advice and support for our baths.
MADE IN GREAT BRITAIN
The TripleBath™ Series is made here in Great Britain with the highest quality of materials.
- Clifton shallow height water baths operate with low liquid levels suiting small bottles, tubes and micro plates.
- Low profile bath allows easy access and better visibility of samples being heated.
Clifton unstirred water baths are designed for immersion of flasks/bottles/racks in a highly stable temperature environment throughout the water bath. The 2 litre shallow tanks are ideal for small vessels, tubes and micro plates for incubation/heating.
3 Year Warranty.
Before leaving our factory every water bath is identified with a unique serial number and undergoes a factory calibration adjusting control to known traceable value. Electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.
The shelf in the stainless steel tank provides a stable support for flasks/bottles/racks that can be removed for cleaning. The shelf is a low height design maximising the working height.
Broad range of accessories available to suit wide range of applications.
Painted surfaces feature “anti-bacterial technology” which inhibits bacterial growth, improving hygiene requirements as demanded by clinical and laboratory environments.
Thermal cut out fitted in the heater.
IP rated clear booted on/off power switch.
Bath fitted with non-slip rubber feet.
Controls
NE1 Series - Easy to use analogue dial pointer for setting temperature, graduated in 5°C divisions.
Illuminated on/off switch and heater indication lamp.
We verify the performance of every bath calibrating its controls and water temperature at 45°C for consistent temperature control in use.
NE1D Series - Digital LED controller for setting temperature with 1°C increments.
Temperatures can be easily and rapidly set with the push button, wipe clean control panel.
Temperature setting is retained in memory, even after ‘power off’.
Heating and Sensors
Heaters and temperature sensor are concealed under the tank providing an easy to clean working area. The heating footprint covers the underside of the tank and with a low mass provides rapid energy transfer, resulting in quicker heat up times and a reduction in energy consumption and improved temperature uniformity.
Heating Information
Above 60°C it is recommended that to achieve optimum performance the bath should be covered with a lid or layer of polypropylene spheres - see accessories. Covering the bath with a lid reduces energy consumption and running costs. This range of baths will operate at 99°C however are not designed for continuous boiling, the NE1B boiling bath range is recommended.
Clifton clear gable lids help reduce evaporation, assist in keeping samples in a water bath free from contamination and save energy. These gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples. The lid design ensures all condensate returns back into the bath. Insulated handles for safe use.
|
Product Code |
Bath |
|---|---|
|
GL1-4AF |
NE1-2/2/2 NE1D-2/2/2 NE1-4/4/4 NE1D-4/4/4 |
When fitted, this lid
prevents contamination of liquid from airborne particles. Can also be useful
when a Clifton water bath is ‘in use’, minimising heat loss, saving energy, and
assisting to maintain bath temperature ready for the next application. The lid
is fitted with an insulated handle.
|
Product Code |
Bath |
|---|---|
|
LD-4 |
NE1-2/2/2 NE1D-2/2/2 NE1-4/4/4 NE1D-4/4/4 |
Clifton stainless steel gable lids help reduce evaporation, assist in keeping samples in a water bath free from contamination and save energy. These stainless steel gable lids with a high profile allow extended use of the bath, right into the edges of the tank. No drip points to contaminate samples. The lid design ensures all condensate returns back into the bath. Insulated handles for safe use.
|
Product Code |
Bath |
|---|---|
|
SL1-4 |
NE1-2/2/2 NE1D-2/2/2 NE1-4/4/4 NE1D-4/4/4 |
Laboratory test tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
- 2/4 litre = 1 rack.
| Product Code |
|---|
|
6870 – (26 holes x 17mm diameter) |
|
6871 – (16 holes x 26 mm diameter) |
|
6872 – (36 holes x 13mm diameter) |
|
6873 – (18 holes x 19mm diameter) |
|
6900 – (12 holes x 32mm diameter) |
Please note : When using the racks on a 2 litre chamber, remove 1 shelf from the rack.
Bath Armor™ is moisture and gas impermeable, high thermal conductivity, smooth and rounded almost fluid like and reduces your water consumption. Only for use with analogue option.
| Product Code |
Capacity |
| BA-2 : 2 Litre Pack |
2 Litre baths
|
| BA-5 : 4 Litre Pack |
4 Litre baths |
| Product Code |
Capacity |
| BP0368 : 1 Pack |
2 Litre baths
4 Litre baths |
Allows easy and quick emptying of water baths, immerse into water bath, squeeze the bellow and point the outlet to a bucket or sink.
| Notes : |
Water temperature must be below 45°C before use. |
| Product Code : |
BX0616 |
|
1. Factory calibration record.
2. The completed calibration record will be enclosed at the rear of the instruction book accompanying the Clifton unit carrying the following information:
Unique record number for traceability.
Serial number of the unit.
Instrument it was checked against.
Calibration temperature and actual sensitivity results.
3. The measurement of uncertainty ±0.8°C. Ambient temperature 21°C ±3°C.
Notes:
A. The calibration record provides a measurement of precision about set point with maximum and minimum sensitivity readings obtained. Precision is defined as “(1) The ability of a measurement to be consistently reproduced” and “(2) The number of significant digits to which a value has been reliably measured”.B. The calibration record does not provide or assures any form of accuracy. Accuracy is defined as “the ability of a measurement to match the actual value of the quantity being measured”.
Product Code : CAL
|
Downloads
The water bath brochure contains all the information on our Clifton water baths, including the shaking baths and the ultrasonic baths.
Detailed document containing the specifications for the Triplebath range of baths.