NE4-SB Universal Heated Thermostirrer

NE4-SB
CLIFTON with slogan2

NE4-SB Universal Heated Thermostirrer

Temperature Range : Ambient +5°C - 99°C
NE4-SB

Clifton NE4-SB features a digital PID temperature controller which provides even water circulation and temperature stability. Designed to be fully compatible and easy to fit onto an array of tanks and vessels (rectangular or circular) with a diameter 30cm or more.

Featuring a low-level float device, which ensures heating is switched off if the liquid falls below the recommended level.

Sustainability Attributes

Built to last, ensuring longevity
Products have minimum energy requirements
Products are recyclable
Compostable and biodegradable packaging
See the range of accessories compatible with the NE4-SB range.

3 Year Warranty

The NE4-SB comes with a 3 year warranty as standard, we also offer free advice and support for our baths.

MADE IN GREAT BRITAIN

The NE4-SB is made here in Great Britain with the highest quality of materials.

Specifications

Product Code NE4-SB
Max Tank Capacity 60 Litres
Temperature Range Ambient + 5°C - 99°C

Accessory DC1-300 provides cooling from ambient to -20°C

Temperature Control PID Digital, LED display showing actual or set temperature, resolution 0.1°C
Temperature Alarm Under/over temperature alarm is automatically set 4˚C above and 4˚C below set point
Sensitivity ±0.05°C
Timer Visual indicator and audible end message - variable 00:01 to 99:59 hh:mm
Heater Power (220-240V) 2000W
Voltage 230V / 50-60Hz
Dimensions
External (mm) 122w x 240d x 335h
Tank Mounting (mm) Double clamp fitting accommodates tank max wall thickness 40mm
Tank Water Levels (mm) Example : with overall tank depth 150mm / max water level 130mm / min 80mm
NE4-SB-diagram-2-2048x6241

Make A Positive Impact With Your Bath

Products are manufactured to the highest standard ensuring long working life.

We design products that have minimum energy requirements with intelligent microprocessor controllers.

Only compostable and bio-degradable bags are used for packaging and glassine bags for all our consumable products.

We recycle all waste and metal scrap off-cuts.

Features and Benefits

Water drop icon

Clifton NE4-SB features a digital PID temperature controller which provides even water circulation and temperature stability. Designed to be fully compatible and easy to fit onto an array of tanks and vessels (rectangular or circular).

Serial no icon

Before leaving our factory every water bath is identified with a unique serial number and undergoes a factory calibration adjusting control to known traceable value. Electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.

anti bac icon

Painted surfaces feature “anti-bacterial technology” which inhibits bacterial growth, improving hygiene requirements as demanded by clinical and laboratory environments.

Warranty icon

3 year Warranty.

Safety Features

  • Features a low liquid level float switch, which ensures heating, is switched off if the liquid falls below the recommended level – display will show “FiLL”. Heating is switched off but stirring continues. To reset carefully top up the liquid to the recommended level.

  • The under/over temperature alarm is automatically set 4˚C above and 4˚C below set temperature. When in alarm condition the indicator illuminates and actual bath temperature is shown. If bath is over temperature both heating and stirring are switched off. Once liquid temperature has fallen or risen above/below the alarm setting, the indicator clears and actual bath temperature is shown.

Energy Consumption

0.5kWh @ 37°C
The lower the figure, the less energy used. Information supplied for size and range comparison, guidance only and measured consumption at set point. Please remember that the energy consumption may vary due to factors such as location, ventilation, ambient temperatures and loading.

Controls

Featuring a bold LED display of measured temperatures in real-time and in increments of ±0.1°C, using a precision PID temperature controller. Setting for water temperature only or combination of temperature and time. Timer setting variable in 1-minute increments from 00:01 [hh:mm] to 99:59 [hh:mm] with “end” message on completion of the timed period. Time and temperature settings are retained in the memory, even after the unit has been turned off.

Heating/Cooling Information

For cooling a water bath use an accessory immersion cooler DC1-300 refer to Accessories. Where bath temperatures are below ambient we recommend a mix of glycol and water. We also recommend a lid or layer of spheres for insulation. The water bath should be used in ambient temperature 20°C. For water temperatures above 60°C we recommend that an accessory lid or layer of spheres are used for optimum performance. This will reduce evaporation and a lid will keep the samples and water free from contamination. Optimum performance saves energy by reducing electricity consumption and running costs.

ACCESSORIES

Immersion Dip Cooler

Designed to be used in conjunction with a Clifton stirred or circulating water bath, the DC1-300 features a flexible 900mm long pipe.

The immersion cooler runs continuously providing counter cooling with the bath providing temperature control from ambient to -20°C (subject to bath capacity). Always cover the water bath with a lid or BP0368 polypropylene spheres. This reduces energy losses by up to 70%. Doubling this layer of polypropylene spheres improves this further.

DCI-300 New image
Description
Product Code
DC1-300
Flexible hose
900mm long
Coil diameter
65mm

UNIVERSAL ACCESSORIES

Downloads

The water bath brochure contains all the information on our Clifton water baths, including the shaking baths and the ultrasonic baths.

Detailed document containing the specifications for the NE4-SB range.