NE2D Duobath™
DuoBaths™
Temperature Range : Ambient + 5°C - 99°C
DuoBaths™ feature two independently controlled unstirred water baths in one space saving unit providing a stable temperature environment. Featuring PID temperature control for precision. DuoBaths™ feature run back or delay start timer.
Controls feature auto alarm setting, illuminated on/off switch, heater and over temperature indications. Comprising of high quality corrosion resistant tanks, with a bright clean finish housed in durable paint finishes outer case.
Painted surfaces feature anti-bacterial finish with good chemical resistance.
Three shelves are supplied, two at conventional height and a taller 100mm version on the 4 litre chambers. Designed to accommodate small media vessels, bijou style bottles in a shallow depth.
Using the conventional height in both chambers gives the benefit of two standard baths in one space saving unit.
Sustainability Attributes
Built to last, ensuring longevity
Products have minimum energy requirements
Products are recyclable
Compostable and biodegradable packaging
Lids reduce energy use by 60%
Bath Armor™ reduces energy use by 70%
See the range of accessories compatible with the NE2D DuoBath™ range.
3 Year Warranty
The DuoBath™ Series comes with a 3 year warranty as standard, we also offer free advice and support for our baths.
MADE IN GREAT BRITAIN
The DuoBath™ Series is made here in Great Britain with the highest quality of materials.
Specifications
| Product Code | NE2D-4/4 | NE2D-4/4 | NE2D-4/8 | NE2D-4/8 |
| Working Depth | Tall shelf = 20mm or shallow shelf 115mm | Shallow shelf = 115mm working depth | Tall shelf = 20mm or shallow shelf 115mm | Shallow shelf = 115mm working depth |
Features and Benefits
Clifton unstirred water baths are designed for immersion of flasks, bottles and racks in a highly stable temperature environment throughout the water bath. By using the taller shelf in 4 litre chamber, shallow vessels and trays can be accommodated.
3 Year Warranty.
Before leaving our factory every water bath is identified with a unique serial number and undergoes a factory calibration adjusting control to known traceable value. Electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.
The shelf in the stainless steel tank provides a stable support for flasks, bottles and racks that can be removed for cleaning. The shelf is a low height design maximising the working height.
Eliminates problems associated with water level/disturbance when placing and removing containers of different sizes or routine operations involving two different temperatures and immersed depths such as keeping media molten in one chamber and incubation of samples in the other.
Painted surfaces feature “anti-bacterial technology” which inhibits bacterial growth, improving hygiene requirements as demanded by clinical and laboratory environments.
Safety Features
Thermal cut out fitted in the heater.
Over temperature alarm automatically set 4˚C above set temperature with visual indicator and heating is turned off protecting samples from over heating.
IP rated clear booted on/off power switch.
Bath fitted with non-slip rubber feet.
Energy Consumption
0.2kWh @ 37°C
0.21kWh @ 60°C - lid fitted
(Based on NE2D-4/4)
The lower the figure, the less energy used. Information supplied for size and range comparison, guidance only and measured consumption at set point. Please remember that the energy consumption may vary due to factors such as location, ventilation, ambient temperatures and loading.
Controls
Featuring bold LED display of measured temperatures in real-time, increments of ±0.1°C, using precision PID temperature control. Settings retained even after turning the unit off. Easy to use splash proof controls, touch keypads for setting temperature values with indicators for heating and over temperature alarm. Features auto setting over temperature alarm protecting samples at set temperature. Every unit undergoes a factory calibration at two temperatures for validation. Should only one tank be required, a stand by feature can be activated for the chamber not in use.
Heating and Sensors
Heaters and temperature sensor are concealed under the tank providing an easy to clean working area. The heating footprint covers the underside of the tank and with a low mass provides rapid energy transfer, resulting in quicker heat up times and a reduction in energy consumption and improved temperature uniformity.
Heating Information
Above 60°C it is recommended that to achieve optimum performance the bath should be covered with a lid or layer of polypropylene spheres - see accessories. Covering the bath with a lid reduces energy consumption and running costs. This range of baths will operate at 99°C however are not designed for continuous boiling, the NE1B boiling bath range is recommended.
ACCESSORIES
Clear Lift Off Gable Lid
Clifton clear gable lids help reduce evaporation, assist in keeping samples in a water bath free from contamination and save energy. These gable lids with a high profile allows extended use of the bath, right into the edges of the tank. No drip points to contaminate samples. The lid design ensures all condensate returns back into the bath. Insulated handles for safe use.
|
Product Code |
Bath |
|---|---|
|
GL1-4AF |
NE2D-4/4 NE2D-4/8 |
|
GL1-8AF |
NE2D-4/8 |
Stainless Steel Flat Lid
When fitted, this lid prevents contamination of liquid from airborne particles. Can also be useful when a Clifton water bath is ‘in use’, minimising heat loss, saving energy, and assisting to maintain bath temperature ready for the next application. The lid is fitted with an insulated handle.
|
Product Code |
Bath |
|---|---|
|
LD-4 |
NE2D-4/4 NE2D-4/8 |
|
LD-8 |
NE2D-4/8 |
Stainless Steel Lift Off Gable Lid
Clifton stainless steel gable lids help reduce evaporation, assist in keeping samples in a water bath free from contamination and save energy. These stainless steel gable lids with a high profile allow extended use of the bath, right into the edges of the tank. No drip points to contaminate samples. The lid design ensures all condensate returns back into the bath. Insulated handles for safe use.
|
Product Code |
Bath |
|---|---|
|
SL1-4 |
NE2D-4/4 NE2D-4/8 |
|
SL1-8 |
NE2D-4/8 |
Stainless Steel Test Tube Racks
Laboratory test tube rack, stainless steel 304 spec 18/8 non-magnetic, bright finish. Supplied flat packed ready for assembly. Can be cleaned with detergents, ultrasonics or autoclaved. Durable and stable in use with looped handles for easy retrieval from hot water baths.
- 4 litre = 1 racks
- 8 litre = 2 racks
| Product Code |
|---|
|
6870 – (26 holes x 17mm diameter) |
|
6871 – (16 holes x 26 mm diameter) |
|
6872 – (36 holes x 13mm diameter) |
|
6873 – (18 holes x 19mm diameter) |
|
6900 – (12 holes x 32mm diameter) |
Stainless Steel Wire Basket
Stainless steel. Baskets recommended for use with ultrasonic and unstirred baths.
|
Product Code |
Bath |
|---|---|
|
BSK-4 |
NE2D-4/4 NE2D-4/8 |
|
BSK-8 |
NE2D-4/8 |
UNIVERSAL ACCESSORIES
Bath Armor™ is moisture and gas impermeable, high thermal conductivity, smooth and rounded almost fluid like and reduces your water consumption.
| Product Code |
Capacity |
| BA-5 : 4 Litre Pack |
4 Litre baths |
| BA-12 : 12 Litre Pack |
8 Litre baths |
| Product Code |
Capacity |
| BP0368 : 1 Pack |
4 Litre baths |
| BP0368 : 2 Packs |
8 Litre baths |
Allows easy and quick emptying of water baths, immerse into water bath, squeeze the bellow and point the outlet to a bucket or sink.
| Notes : |
Water temperature must be below 45°C before use. |
| Product Code : |
BX0616 |
|
1. Factory calibration record.
2. The completed calibration record will be enclosed at the rear of the instruction book accompanying the Clifton unit carrying the following information:
Unique record number for traceability.
Serial number of the unit.
Instrument it was checked against.
Calibration temperature and actual sensitivity results.
3. The measurement of uncertainty ±0.8°C. Ambient temperature 21°C ±3°C.
Notes:
A. The calibration record provides a measurement of precision about set point with maximum and minimum sensitivity readings obtained. Precision is defined as “(1) The ability of a measurement to be consistently reproduced” and “(2) The number of significant digits to which a value has been reliably measured”.B. The calibration record does not provide or assures any form of accuracy. Accuracy is defined as “the ability of a measurement to match the actual value of the quantity being measured”.
Product Code : CAL
|
Downloads
The water bath brochure contains all the information on our Clifton water baths, including the shaking baths and the ultrasonic baths.
Detailed document containing the specifications for the NE2D Duobath range of baths.