Chattaway Spatula PTFE Coated - Stainless Steel​



Product Code NE1-2.5 NE1-4 NE1-8 NE1-14 NE1-22 NE1-28 NE1-56
Chamber Capacity 2.5 Litres 4 Litres 8 Litres 14 Litres 22 Litres 28 Litres 56 Litres
Temperature Range Ambient + 5°C – 100°C

Will operate at 100°C but not designed for continuous boiling, we recommend boiling baths

Temperature Control Analogue dial pointer, graduated in 5°C divisions
Sensitivity ±0.5°C ±0.25°C
Uniformity ±0.5°C ±0.1°C
Heater Power (220-240V) 250W 400W 800W 1000W 1500W 2500W
Voltage 230V 50-60Hz 120V or 230V models available 50-60Hz
Drain Tap Fitted
Dimensions
External (mm) 270w x 190d x 240h 332w x 185d x 290h 332w x 270d x 290h 361w x 332d x 290h 538w x 332d x 290h 660w x 540d x 290h
Internal (mm) 230w x 130d x 150h 300w x 150d x 150h 300w x 240d x 150h 325w x 300d x 150h 500w x 300d x 150h 500w x 300d x 200h 620w x 500d x 200h
Water Level Max. (mm) 130 180
Water Level Min. (mm) 55






The lower the figure, the less energy used. Information supplied for size and range comparison, guidance only and measured consumption at set point. Please remember that the energy consumption may vary due to factors such as location, ventilation, ambient temperatures and loading.

Heaters and temperature sensor are concealed under the tank providing an easy to clean working area. The heating footprint covers the underside of the tank and with a low mass provides rapid energy transfer, resulting in quicker heat up times and a reduction in energy consumption and improved temperature uniformity.

Above 60°C it is recommended that to achieve optimum performance the bath should be covered with a lid or layer of polypropylene spheres – see accessories. Covering the bath with a lid reduces energy consumption and running costs. This range of baths will operate at 100°C however are not designed for continuous boiling, the NE1B boiling bath range is recommended.


Accessories